Strimometer Support
Local-network throughput and stability testing for the path to your Apple TV.
Requirements and setup
Use an iPhone with iOS 17+ or a Mac with macOS 14+ as the controller, and an Apple TV with tvOS 17+ as the endpoint. Both devices must be on the same local network.
- Follow the official TestFlight installation links for the controller and endpoint. Open the Apple TV invitation on your iPhone or Mac, then install using TestFlight on Apple TV with the same Apple ID.
- Open Strimometer on Apple TV and keep it in the foreground.
- Allow Local Network access when prompted. Open the controller, select the endpoint under Available Devices, and select Start Test.
- After about 12 seconds, review the estimated safe media bitrate, stability, playback estimates, and measurement details.
If the endpoint does not appear, check Local Network permission in system Settings, confirm both devices are on the same LAN, and make sure the Apple TV app is open. Guest-network isolation or blocked Bonjour discovery may prevent discovery or connection.
The endpoint accepts one test at a time. Wait for an active test to finish before starting another.
Frequently asked questions
Does this measure Internet speed?
No. It measures synthetic TCP traffic sent from the controller to the endpoint across your local network. Measurements need no Internet connection or cloud service; downloading the apps through TestFlight requires Internet access.
Does “Likely OK” guarantee smooth playback?
No. “Likely OK”, “Marginal”, and “Unlikely” are estimates for common playback profiles. Player buffering, bitrate peaks, codecs, server performance, and later network changes can affect actual playback. Strimometer does not play or inspect your media.
What does “Interrupted” mean?
Data delivery was near zero for about 1.5 seconds or longer during the test. Such a result never rates a playback profile “Likely OK”, even if the estimated safe bitrate is high.
Can I compare previous tests?
Completed tests are saved locally on the controller. View recent tests and export full history as JSON with raw samples, or CSV with summaries. Cancelled and failed tests are not saved. Renaming the endpoint starts a new history group.
Is it free, and where is it available?
The installation page lists TestFlight beta invitations. TestFlight determines enrollment and build availability. Release pricing, regional availability, and an App Store release are not confirmed here.
Does it support Android, Windows, Linux, or Raspberry Pi?
The product installation links cover the iPhone/Mac controller and Apple TV endpoint. No released Android, Windows, Linux, or Raspberry Pi app is listed. The Linux/Raspberry Pi endpoint in the development repository is experimental.
Does it diagnose packet loss or AirPlay problems?
No. Throughput dips are not direct packet-loss measurements. Strimometer does not provide packet-loss analysis or AirPlay health diagnostics, and it does not test streaming services or transcoding performance.
How measurement and interpretation work
The default test uses one TCP connection and one stream: a 2-second warm-up and 10 seconds of measurement, sampled about every 500 milliseconds. The endpoint owns the measurement clock, counts received bytes, and returns statistics. Synthetic payload bytes are discarded and never stored on disk.
Details include sustained, median, P10, minimum, and rolling 5-second minimum throughput. Mbps means one million bits per second. A single stream may underestimate capacity available to multiple parallel streams.
The estimated safe media bitrate is the worst 5-second throughput multiplied by 0.70, rounded down to whole Mbps. For tests too short for that window, it uses P10 instead. Stability compares slow periods with median throughput; near-zero delivery lasting about 1.5 seconds produces an Interrupted indication.
Playback profiles assume 10 Mbps for lossless audio, 25 Mbps for typical 4K, 80 Mbps for high-bitrate 4K, and 120 Mbps for very high-bitrate remux. These are conservative interpretation assumptions, not measurements of a particular file or service. The safety factor and profile thresholds are preliminary and not fully calibrated against real playback.
Discovery uses Bonjour service _streamcheck._tcp. The name predates Strimometer. Its private version-1 protocol is not iperf3-compatible. The test measures the controller-to-endpoint direction; it is not a bidirectional benchmark.
Privacy and local history
Measurement traffic stays on your local network. The apps use no analytics, measurement uploads, cloud sync, or product account. The Apple TV endpoint stores neither payload bytes nor test history.
Completed test history, including raw samples, is stored locally on the controller that ran the test. Controllers do not sync history with each other. Use Clear History in the History menu to remove saved tests.
JSON and CSV exports are saved or shared only where you choose. The app does not automatically upload exports or save them to iCloud Drive. TestFlight distribution is separate from the local measurement path.